Here follows a list of all warning codes on the app. Click the link on the code to further see how errors can be resolved.
101: Unable to connect to the communicator. This could be due to GSM networks not being available or congested.
102: An invalid response has been received from the communicator.
103: A link could not be established with the panel. Check that your communicator panel settings match the alarm panel.
104: A link could not be established with the panel.
105
106: The wireless device selected does not match the command. Please check your wireless type settings.
107: The wireless device does not support this command. Please check your wireless type settings.
108
120: There is already an active connection to the panel. This could be another user or a communicator upgrade.
121
122
123: Unable to connect to the user servers.
124
125
126: This user does not have permission to access the panel.
127: The connection to the user server has been lost.
128: Unable to connect to the communicator. This could be due to the cellular network not being available or congested.
129: The cellular network provider dropped communication to the panel.
140
141
142: The server connection has been dropped due to inactivity.
143: The device connection has been dropped due to inactivity.
144: The connection to the panel was lost.
145: The panel did not respond in time.
146: The command is not supported. Please check your panel setting on the communicator.
147
148
149
160: The user code to connect to the alarm panel. Please use the same user code used to arm/disarm the alarm panel.
161
162
163: The user code to connect to the alarm panel. Please use the same user code used to arm/disarm the alarm panel or change your panel settings.
164
165: An unknown panel error was received from the alarm panel.
166: The alarm panel version is outdated and does not support this command.
167
168
169: The alarm panel denied this command. The user might not have permission from the alarm panel to perform this action.
170
171: Too many commands have been sent to the alarm panel.
172: Too many commands have been sent to the alarm panel.
173: Too many commands have been sent to the alarm panel.
174: Too many commands have been sent to the alarm panel.
175: The alarm panel interface module did not respond.
176: The alarm panel interface module did not respond.
177: The alarm panel interface module did not respond.
178: The alarm panel interface module is not communicating with the alarm panel.
179: The alarm panel interface module is busy at present.
180: The alarm panel interface module is busy at present.
181: Unable to connect to the alarm panel because the alarm panel interface module is in installer mode.
182
183: The requested panel partition does not exist or is not activated.
184: The alarm panel version is outdated and does not support this command.
185: The alarm panel could not be armed. Please check that all relevant zones are not active.
186: The alarm panel is not ready to arm. Please check that all relevant zones are not active.
187
188
189
190: A communication issue between the alarm panel and communicator occurred.
191: The alarm panel is unresponsive. Please check your panel settings on the communicator.
192
193
194: The alarm panel is busy with another user.
195: Too many commands have been sent to the alarm panel.
196: The alarm panel is locked out.
197: Unable to connect to the alarm panel, due to power issues.
198: The alarm panel is not in the correct programming mode. Please edit your panel settings.
199: The user code to connect to the alarm panel is incorrect. Please use the same user used to arm/disarm the alarm panel.
200: The user code to connect to the alarm panel is incorrect. Please use the same user used to arm/disarm the alarm panel.
201: The alarm panel is busy and unable to receive commands at this time.
202: The requested partition does not exist or is not activated.
203: The alarm panel version is outdated and does not support this command.
204: The alarm panel is unable to process this command.
205: The alarm panel did not respond in time.
206: The alarm panel reset failed.
207: No alarm found on the alarm panel.
208: Please enable the communicator in the alarm panel programming settings.
209: There is an invalid trouble condition on the alarm panel.
210: The alarm panel requires a programming tag.
211: Too many commands have been sent to the alarm panel.
212: Active session on the panel has expired.
213
214
215
216: The alarm panel command cannot be performed because the system is armed.
217: The alarm panel command cannot be performed because the system is in alarm. Please remove the alarm panel from its alarm condition and try again.
218: The alarm panel command cannot be performed because there is a default jumper on the alarm panel. Please remove the default jumper and try again.
219
220: Please exit the alarm panel programming mode and try again
221
222
223: The user code is already in use on the alarm panel.
224: The alarm panel command cannot be performed because the system is in RF allocation mode.
225
226: The alarm panel is being remotely upgraded.
227
228
301: The app team has been notified to resolve the issues.
302: The app team has been notified to resolve the issues.
303: The app team has been notified to resolve the issues.
304: The app team has been notified to resolve the issues.
305
306
307
308: Panel request was cancelled.
401: The user code to connect to the alarm panel is invalid. Please change your user code on the alarm panel.
102: An invalid response has been received from the communicator.
103: A link could not be established with the panel. Check that your communicator panel settings match the alarm panel.
104: A link could not be established with the panel.
105
106: The wireless device selected does not match the command. Please check your wireless type settings.
107: The wireless device does not support this command. Please check your wireless type settings.
108
120: There is already an active connection to the panel. This could be another user or a communicator upgrade.
121
122
123: Unable to connect to the user servers.
124
125
126: This user does not have permission to access the panel.
127: The connection to the user server has been lost.
128: Unable to connect to the communicator. This could be due to the cellular network not being available or congested.
129: The cellular network provider dropped communication to the panel.
140
141
142: The server connection has been dropped due to inactivity.
143: The device connection has been dropped due to inactivity.
144: The connection to the panel was lost.
145: The panel did not respond in time.
146: The command is not supported. Please check your panel setting on the communicator.
147
148
149
160: The user code to connect to the alarm panel. Please use the same user code used to arm/disarm the alarm panel.
161
162
163: The user code to connect to the alarm panel. Please use the same user code used to arm/disarm the alarm panel or change your panel settings.
164
165: An unknown panel error was received from the alarm panel.
166: The alarm panel version is outdated and does not support this command.
167
168
169: The alarm panel denied this command. The user might not have permission from the alarm panel to perform this action.
170
171: Too many commands have been sent to the alarm panel.
172: Too many commands have been sent to the alarm panel.
173: Too many commands have been sent to the alarm panel.
174: Too many commands have been sent to the alarm panel.
175: The alarm panel interface module did not respond.
176: The alarm panel interface module did not respond.
177: The alarm panel interface module did not respond.
178: The alarm panel interface module is not communicating with the alarm panel.
179: The alarm panel interface module is busy at present.
180: The alarm panel interface module is busy at present.
181: Unable to connect to the alarm panel because the alarm panel interface module is in installer mode.
182
183: The requested panel partition does not exist or is not activated.
184: The alarm panel version is outdated and does not support this command.
185: The alarm panel could not be armed. Please check that all relevant zones are not active.
186: The alarm panel is not ready to arm. Please check that all relevant zones are not active.
187
188
189
190: A communication issue between the alarm panel and communicator occurred.
191: The alarm panel is unresponsive. Please check your panel settings on the communicator.
192
193
194: The alarm panel is busy with another user.
195: Too many commands have been sent to the alarm panel.
196: The alarm panel is locked out.
197: Unable to connect to the alarm panel, due to power issues.
198: The alarm panel is not in the correct programming mode. Please edit your panel settings.
199: The user code to connect to the alarm panel is incorrect. Please use the same user used to arm/disarm the alarm panel.
200: The user code to connect to the alarm panel is incorrect. Please use the same user used to arm/disarm the alarm panel.
201: The alarm panel is busy and unable to receive commands at this time.
202: The requested partition does not exist or is not activated.
203: The alarm panel version is outdated and does not support this command.
204: The alarm panel is unable to process this command.
205: The alarm panel did not respond in time.
206: The alarm panel reset failed.
207: No alarm found on the alarm panel.
208: Please enable the communicator in the alarm panel programming settings.
209: There is an invalid trouble condition on the alarm panel.
210: The alarm panel requires a programming tag.
211: Too many commands have been sent to the alarm panel.
212: Active session on the panel has expired.
213
214
215
216: The alarm panel command cannot be performed because the system is armed.
217: The alarm panel command cannot be performed because the system is in alarm. Please remove the alarm panel from its alarm condition and try again.
218: The alarm panel command cannot be performed because there is a default jumper on the alarm panel. Please remove the default jumper and try again.
219
220: Please exit the alarm panel programming mode and try again
221
222
223: The user code is already in use on the alarm panel.
224: The alarm panel command cannot be performed because the system is in RF allocation mode.
225
226: The alarm panel is being remotely upgraded.
227
228
301: The app team has been notified to resolve the issues.
302: The app team has been notified to resolve the issues.
303: The app team has been notified to resolve the issues.
304: The app team has been notified to resolve the issues.
305
306
307
308: Panel request was cancelled.
401: The user code to connect to the alarm panel is invalid. Please change your user code on the alarm panel.