Setup for Hikvision AX Pro : Knowledge Base

How can we help you today?

Setup for Hikvision AX Pro Print

Modified on: Tue, 10 Aug, 2021 at 3:00 PM

Set the serial port format on the Falcon to Rhino.

Please take note that the firmware version of the Hikvision alarm system should be V1.2.3 build 210401 or later.
In the Hikvision Communication settings, set the Alarm Receiving Center to FSK Module.

Connect the Hikvision AXPRO to the GSM Falcon (or Guardian Plus unit) as shown below:

Click here if you found the article helpful